Order Today! 1-603-890-3699
Cart 0
Order Today! 1-603-890-3699
RIGID-LOCK QUICKBERM® PLUS, DIMS. 12'W x 28'L x 12", CAP. 2510 GALS - SolventWaste.com



$4,866.72 $ 5,407.47

The QuickBerm Plus® offers superior protection and chemical resistance against the harshest of liquids, including petroleum, oils, greases, and most acids. Exhibits three times greater resistance against punctures and abrasion, resulting in longer wear over other popular QuickBerm® products – excellent for heavy vehicle traffic.

Unlike floating-wall type berms that are susceptible to wall collapse and containment failure, the patented Rigid-Lock stainless steel brace supports walls at full 90° locked position for secure, leakproof containment. A simple push on the walls unlocks the support and lays the wall down for drive-through capability from any angle.

The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter. The device only folds down one way, inward towards the inside of the berm. The one-piece design folds down flat and remains integral to the sidewall. Supports resist extreme temperatures (-50F to 160F). When in the down position, they can withstand vehicle weights in excess of 11,000 lbs (5,000 kg) at each tire. While in the up position, the supports will hold up to wind loads of 40 miles per hour. Additionally, Rigid-Lock supports will perform at full rim containment height—meaning the berm is entirely full—without bend or buckles. In case of damage, for example a user drives out of the berm without lowering the wall to the proper exit position, the stainless steel support rods are replaceable. 

Reinforced CriticalCorner™ design with wraparound diagonal radio frequency (RF) welds offer exceptionally strong structural integrity to prevent seam leaks, provide fluid-tight reliability, and extend berm life expectancy. Finished hem edge on top of sidewall prevents fraying and adds strength. Each support includes a heavy-duty brass grommet for anchoring the berm under high wind conditions. Anchor stakes not included.

For added resistance against rocky surfaces or heavy in-out traffic use tarps, ground mats, track mats, or track runners.

Helps comply with EPA for containment and spill prevention (SPCC).

  • Material Specifications: EnGuard™VI, modified PVC coated fabric
  • Sump Capacity: 2510 gal (9501L)
  • Dimensions, Interior: 144" W x 12" H x 336" D (3658mm W x 305mm H x 8534mm D)
  • Dimensions, Exterior: 152" W x 12" H x 344" L (3861mm W x 305mm H x 8738mm L)
  • Dimensions, Folded:32" W x 16" H x 32" L (813mm W x 406mm H x 813mm L)

Coming Soon!

Check out Justrite's videos on their YouTube Channel.

Share this Product

More from this collection