Order Today! 1-603-890-6825
Cart 0
Order Today! 1-603-890-6825
8" ECO Funnel with 38mm Cap adapter, yellow lid, suitable for 4L Container - SolventWaste.com

8" ECO Funnel with 38mm Cap adapter, yellow lid, suitable for 4L Container

$99.99 $ 107.91

The 8 inch ECO Funnel with 38-430 screw cap features a latching lid with gasket to maintain an air-tight seal and keep fumes contained. A removable large particle filter catches stir bars or other items. The 11" funnel stem reduces chemical evaporation, and the secondary air lock tube helps prevent over-filling.

The ECO Funnel® is the ultimate lab safety product for collection of hazardous liquid waste. Its unique, patented design performs two functions, acting as both a sealed waste container and a solvent funnel. The 8" ECO Funnel® is made of HDPE and has a 2000 mL fluid capacity. This solvent funnel with lid features an easy use lid, gasket, and positive latch to close lid and maintain an air-tight seal. A filter is also built into the interior to reduce the loss of stir sticks or other particles in the waste liquid. An 11" stem also reduces chemical evaporation of hazardous solvents in the lab.

  • 8" wide funnel with lid, gasket and screw cap fits containers with a 38mm neck size
  • 11" stem also reduces chemical evaporation of hazardous solvents in the lab
  • secondary air lock tube helps prevent overfilling and spills
  • Funnel top without the stem measures 9"W x 11"L
  • large particle filter catches stir bar and large debris
  • Constructed of chemically resistant HDPE
  • 8" ECO Funnel can be fitted with up to 8 HPLC waste lines

Fits the following containers:

  • 4 Liter LDPE EC-2004
  • 4 Liter Narrow-Mouth Polypropylene NG-2203-0010 (Autoclavable)
  • 4 Liter NG-2126-4000 (Heavy Duty Autoclavable)
  • 4 Liter Polypropylene NG-2204-0010 (Amber Autoclavable)

Features of the ECO Funnel®

  • Solves the "open waste container" problem.
  • Prevents emissions of 99.9% of volatile waste solvents, acids, and bases in the laboratory.
  • Maintains an average cost of approximately $0.07 per day, assuming a four-year product use.
  • Has a unique, patented design that meets most local, state and federal safety regulations and requirements.
  • May be used again and again and resists nearly all corrosive chemicals.
  • Is considered a state of the art product by environmental health and safety officers and industry professionals.
  • Applies to Pharmaceutical, Biotech, Academic and Government laboratories and is widely used.
  • Extended Information

    The ECO Funnel™ is the ultimate lab safety product for collection of hazardous liquid waste. Its unique, patented design performs two functions, acting as both a sealed waste container and a solvent funnel.

    • Solves the "open waste container" problem.
    • Prevents emissions of 99.9% of volatile waste solvents, acids, and bases in the laboratory.
    • Maintains an average cost of approximately $0.07 per day, assuming a four-year product use.
    • Has a unique, patented design that meets most local, state and federal safety regulations and requirements.
    • May be used again and again and resists nearly all corrosive chemicals.
    • Is considered a state of the art product by environmental health and safety officers and industry professionals.
    • Applies to Pharmaceutical, Biotech, Academic and Government laboratories and is widely used.

    Safety Regulations

    The following Federal Regulations (EPA / OSHA) can be met through regular use of ECO Funnel systems and secondary containment:

    29 CFR 1910.1450 (Appnx. A) E.1(b): "Avoidance of routine exposure: develop and encourage safe habits; avoid unnecessary exposure to chemicals by any route."

    29 CFR 1910.1450 (Appnx. A): D.11(e): "Indiscriminate disposal by pouring waste chemicals down the drain or adding them to mixed refuse for landfill burial is unacceptable. Hoods should not be used as a means of disposal for volatile chemicals."

    40 CFR 264.173(a): "A container holding hazardous waste must always be closed during storage except with it is necessary to add or remove waste."

    40 CFR 264.175(b)(3): "The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater..."

    29 CFR 1910.1450 Appnx. A) D.2(b): "Stockrooms/Storerooms: ...chemicals which are highly toxic or other chemicals whose containers have been opened should be in unbreakable secondary containers..."

8" wide funnel with lid, gasket and screw cap fits containers with a 38mm neck size 11" stem also reduces chemical evaporation of hazardous solvents in the lab secondary air lock tube helps prevent overfilling and spills Funnel top without the stem measures 9"W x 11"L large particle filter catches stir bar and large debris Constructed of chemically resistant HDPE funnel has a 2000mL fluid capacity can be fitted with up to 8 HPLC waste lines

Coming Soon!

Check out Cp Lab Safety's videos on their YouTube Channel.


Share this Product


More from this collection